Avaya X330WAN - Manual (Page 187)

Layer 3 CLI Commands
Avaya X330WAN User’s Guide 165
clear arp-cache
Use the clear arp-cache command to delete all dynamic entries from the ARP
cache and the IP route cache.
Syntax
clear arp-cache [|[]]
Parameters
Example
clear fragment
Use the clear fragment command to clear the fragment database and restore its
defaults.
Note: No IP reassembly is performed on packets in transit through the router.
Syntax
clear fragment
vlan VLAN string (up to 16 characters) or VLAN ID number.
ip addr IP address.
mask IP mask.
clear arp-cache Flush all ARP entries.
clear arp-cache “FabricFastEthernet
1:1”
Flush ARP entries for a VLAN.
clear arp-cache 30 Flush ARP entries for a VLAN ID.
clear arp-cache 192.168.0.0 255.255.0.0 Flush range of ARP entries
belonging to one subnet.