Avaya X330WAN - Manual (Page 161)

Interface Serial CLI Commands
Avaya X330WAN User’s Guide 139
show queueing
Use the show queueing command to display the priority queue size, in packets.
Syntax
show queueing [Serial ]
Parameters
Example
X330WAN-2DS1-1(super)# show queueing Serial 1
shutdown (X330WAN-2USP Serial interface context)
Use the shutdown command to shutdown the selected interface. The no form of this
command activates the selected interface.
Note: This command is executed from the Serial, Loopback, Fast Ethernet, and
Console interfaces.
Syntax
[no] shutdown
Note: The no shutdown option is not available in the Console interface.
transmitter-delay (X330WAN-2USP Serial interface context)
Use the transmitter-delay command to set the minimum number of flags
needed to recognize the end of one data frame. The no form of this command
restores the default value, 0 flags, which is the shared flag mode.
Syntax
[no] transmitter-delay
Parameters
Example
X330W-2USP-1(super-if:Serial2)# transmitter-delay 2
if-number The port number of this interface, either 1 or 2.
number An integer from 0-15. The minimum number of flags for recognizing
the end of one data frame and the beginning of the next.