HP XP7 Storage - Manual (Page 96)

\\.\CMD-368000:/dev/rdsk
HORCM_LDEV
Ora dev1 366000 02:00 h1
Ora dev2 366000 02:01 h1
#/********** For HORCM_INST ****************/
HORCM_INST
#dev_group ip_address service
Ora PHOST horcm0
Commands to the virtual storage machine
When HORCM starts, RAID Manager obtains the virtual storage machine information from multiple
storage systems, and configure each virtual storage machine component. RAID Manager regards
commands as the command to the virtual storage machine by the descriptions of the configuration
definition file or the command options (i.e., -s or -u ), and use their information.
The following table shows how to issue the command to the virtual storage machine for each
command.
Remarks How to issue the command to the virtual storage machine Commands
--- Describe the virtual storage machine information in
HORCM_LDEV in the configuration definition file. paircreate
--- Describe the virtual storage machine information in
HORCM_LDEV in the configuration definition file. pairsplit
--- Describe the virtual storage machine information in
HORCM_LDEV in the configuration definition file. pairresync
--- Describe the virtual storage machine information in
HORCM_LDEV in the configuration definition file. pairevtwait
--- Describe the virtual storage machine information in
HORCM_LDEV in the configuration definition file. pairvolchk
--- Describe the virtual storage machine information in
HORCM_LDEV in the configuration definition file. pairdisplay
--- Describe the virtual storage machine information in
HORCM_LDEV in the configuration definition file. paircurchk
--- Describe the virtual storage machine information in
HORCM_LDEV in the configuration definition file. horctakeover
--- Describe the virtual storage machine information in
HORCM_LDEV in the configuration definition file. raidvchkset
--- Describe the virtual storage machine information in
HORCM_LDEV in the configuration definition file. raidvchkdsp
--- Describe the virtual storage machine information in
HORCM_LDEV in the configuration definition file. pairsyncwait
--- Describe the virtual storage machine information in
HORCM_LDEV in the configuration definition file. pairmon
You cannot specify a virtual
storage machine by the -u Specify the virtual storage machine by the -s option.
The virtual storage machine can be specified regardless of
the description contents of the configuration definition file.
raidscan
ID> option of the raidscan
command. Use the -s
option.
The raidar command has no
option to specify a serial Specify the virtual storage machine by a unit ID by the
command option (-p ). raidar
number nor a unit ID. Use the
96 RAID Manager functions on the P9500 and XP7 Storage