HP XP7 Storage - Manual (Page 261)

Table 80 SSB codes that are returned by raidcom add snap_pool command (continued)
raidcom add snap_pool
Description Error code Executing/
Async Error message
SSB2 SSB1
The specified LDEV cannot be operated because it is an external
volume mapped for online data migration. 0074 2E30 Async Get Command Status
The specified volume cannot be used as a pool volume. 0085 2E30 Async Get Command Status
The threshold value 1 is out of range. 6000 2E30 Executing CMDRJE
The specified pool attribute differs from the pool attribute of
existed pool. 6004 2E30 Async Get Command Status
The RAID level of the specified LDEV is different from the RAID
level of the other pool volumes. 0015 2E31 Async Get Command Status
There is a blocked pool volume. 0016 2E31 Async Get Command Status
External volumes whose cache modes are different are included. 0018 2E31 Async Get Command Status
The POOL Name is duplicated with another pool. 6001 2E31 Executing CMDRJE
The pool cannot include volumes in different RAID levels because
the pool cannot include those volumes. Or the pool cannot 6004 2E31 Async Get Command Status
include the RAID 1 volumes and the volumes of other RAID levels
together.
The pool cannot include both internal volumes and external
volumes because the pool is not set to Mixable. 6005 2E31 Async Get Command Status
The usage capacity exceeds the license capacity of program
product. 9000 2E31 Async Get Command Status
An internal error occurred. FEEC 2EE7 Executing CMDRJE
Call HP Technical Support. Async Get Command Status
The specified parameter is invalid. Check the HP XP7 RAID
Manager Reference Guide. 0002 2EF3 Executing CMDRJE
Table 81 SSB codes returned by raidcom add snapshot
raidcom add snapshot
Description Error code Executing/Async Error message
SSB2 SSB1
The value exceeds the range of LDEV number. 0000 2E00 Executing CMDRJE
A pair cannot be created because there are not enough
cache management devices. 0013 2E00 Executing CMDRJE
The command ends abnormally because the volume out of
the range of LDEV number is specified as the P-VOL of a
Fast Snap or Snapshot pair. 0028 2E00 Executing CMDRJE
The command ends abnormally because the volume out of
the range of LDEV number is specified as the S-VOL of a
Fast Snap or Snapshot pair. 0029 2E00 Executing CMDRJE
The specified pool ID is out of the range. 6000 2E00 Executing CMDRJE
There are not enough required input parameters. 9701 2E00 Executing CMDRJE
A pair cannot be created because the volume exceeded
the support size is specified as the P-VOL of a Fast Snap
or Snapshot pair. 0020 2E10 Executing CMDRJE
Error messages and error codes 261