HP XP7 Storage - Manual (Page 272)

Table 84 SSB codes returned by raidcom delete snapshot (continued)
raidcom delete snapshot
Description Error code Executing/Async Error message
SSB2 SSB1
between the P-VOL of a Fast Snap/Snapshot pair and the
S-VOL of a Continuous Access Synchronous asynchronous
pair.
The operation cannot be performed because the Quick
Restore is being operated on the specified Business Copy
P-VOL. 004E 2E10 Executing CMDRJE
A Snapshot data cannot be obtained because the pool or
the pool-VOL is blocked. 6019 2E10 Executing CMDRJE
The command ends abnormally because other than the
raidcom add snapshot command is issued for the volume
other than the Fast Snap or Snapshot pair. 9700 2E10 Executing CMDRJE
The command ends abnormally because the pair is in the
state of unacceptable the command. 9701 2E10 Executing CMDRJE
An error occurred at the operation of Fast Snap due to one
of the following reasons: 9800 2E10 Executing CMDRJE
•
The LDEV number specified for the P-VOL or the S-VOL
is incorrect.
• The LDEV specified as the P-VOL or the S-VOL is not
paired.
•
The pair of the specified P-VOL or the S-VOL is not ready
to perform the specified operation.
• The specified Snapshot ID (MU number) is wrong.
•
The specified Snapshot ID (MU number) is already used.
•
The specified pool is not in the usable status.
• The license capacity has exceeded the maximum.
•
The control table for Fast Snap is depleted.
The operation cannot be performed because power-off is
in progress. 8003 2E11 Executing CMDRJE
The specified LDEV is not defined. 0000 2E20 Executing CMDRJE
The command ends abnormally because an unmounted
volume is specified as the P-VOL of a Fast Snap or Snapshot
pair. 0008 2E20 Executing CMDRJE
The command ends abnormally because the blocked
volume is specified as the P-VOL of a Fast Snap or Snapshot
pair. 0009 2E20 Executing CMDRJE
The command ends abnormally because the shared
memory (FC, TPF, or Extension2) is not expanded for
necessary capacity. 8107 2E21 Executing CMDRJE
The command ends abnormally because the shared
memory (SS2 or more) is not expanded for necessary
capacity. 8108 2E21 Executing CMDRJE
An internal error occurred. Call HP Technical Support. FEEC 2EC6 Executing CMDRJE
272 Troubleshooting