HP XP7 Storage - Manual (Page 276)

Table 87 SSB codes that are returned by raidcom add thp_pool command (continued)
raidcom add thp_pool
Description Error code Executing/
Async Error message
SSB2 SSB1
The RAID level of the specified LDEV is different with the RAID
level of others. 0015 2E31 Async Get Command Status
There is a blocked pool volume. 0016 2E31 Async Get Command Status
External volumes whose cache modes are different are included. 0018 2E31 Async Get Command Status
The POOL Name is duplicated with another pool. 6001 2E31 Executing CMDRJE
The pool cannot include volumes in different RAID levels because
the pool cannot include those volumes. Or the pool cannot 6004 2E31 Async Get Command Status
include the RAID 1 volumes and the volumes of other RAID levels
together.
The pool cannot include both internal volumes and external
volumes because the pool is not set to Mixable. 6005 2E31 Async Get Command Status
The usage capacity exceeds the license capacity of program
product. 9000 2E31 Async Get Command Status
The command cannot be accepted. After a while, execute the
same command. 00EE 2EE7 Executing CMDRJE
An internal error occurred. FEEC 2EE7 Executing CMDRJE
Call HP Technical Support. Async Get Command Status
Table 88 SSB codes that are returned by raidcom modify rcu command
raidcom modify rcu
Description Error code Executing/
Async Error message
SSB2 SSB1
CU# of RCU exceed the effective value. 3001 2E00 Executing CMDRJE
The value of least path number is invalid. 3002 2E00 Executing CMDRJE
The value of RIO MIH time is invalid. 3003 2E00 Executing CMDRJE
The value of Round-trip response time is invalid. 3004 2E00 Executing CMDRJE
Invalid product ID or path registration ID. 3005 2E00 Executing CMDRJE
Incident that is created by CU is not in the one of followings. 3007 2E00 Executing CMDRJE
- Incident that is sent to MCU host and RCU.
- Incident that is sent to RCU.
Command cannot be executed because the parameter of
specified RCU is invalid. 3008 2E00 Async Get Command Status
Command cannot be executed because all the CU numbers in
the RCU is not unified at the path that is specified creation or
deletion. 3009 2E00 Async Get Command Status
The CU number is out of effective range. 7100 2E00 Executing CMDRJE
The operation cannot be done because the microcode is being
changed. 8004 2E11 Executing CMDRJE
The serial number, the product ID, or the SSID of the target
storage system is incorrect. 3000 2E20 Executing CMDRJE
276 Troubleshooting