HP XP7 Storage - Manual (Page 290)

Table 107 SSB codes that are returned by raidcom add path command (continued)
raidcom add path
Description Error code Executing/
Async Error message
SSB2 SSB1
The WWN on the side of specified external storage is not
connected to an External port. 4400 2E10 Async Get Command Status
The operation cannot continue because the microcode is being
replaced. 8011 2E11 Async Get Command Status
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
There is no external volume group. 4100 2E20 Executing CMDRJE
Invalid WWN. 4400 2E20 Async Get Command Status
There is no path group. 4500 2E20 Executing CMDRJE
/Async Get Command Status
The same path has been defined already. 4300 2E22 Executing/Async CMDRJE
Get Command Status
The operation cannot be done because the number of path in
the path group exceeds 8. 4303 2E23 Async Get Command Status
The attribute of a port is not External (ELUN). 8400 2E30 Executing CMDRJE
The specified external storage LU is the device of not supported. 4000 2E31 Async Get Command Status
The specified external storage system is not supported. 4001 2E31 Async Get Command Status
The command cannot be accepted. After a while, execute the
same command. 00EE 2EDA Executing CMDRJE
An internal error occurred. FEEC 2EDA Async Get Command Status
Call HP Technical Support.
An internal error occurred. FFFF 2EDA Async Get Command Status
Call HP Technical Support.
Table 108 SSB codes that are returned by raidcom -logout command
raidcom -logout
Description Error code Executing/
Async Error message
SSB2 SSB1
Failed to release the resource lock. 2200 2E01 Executing CMDRJE
Table 109 SSB codes that are returned by raidcom monitor pool command
raidcom monitor pool
Description Error code Executing/
Async Error message
SSB2 SSB1
The value of pool ID is out of range. 6000 2E00 Executing CMDRJE
Monitor cannot be started because the performance monitor is
in the collecting status. 6004 2E10 Executing CMDRJE
290 Troubleshooting