HP XP7 Storage - Manual (Page 238)

Table 59 SSB codes that are returned by raidcom modify port -security _switch command (continued)
raidcom modify port -security _switch
Description Error code Executing/
Async Error message
SSB2 SSB1
The other than "P-to-P (point to point)" cannot be specified when
specifying a topology of the package for Fibre Channel over
Ethernet. 05A7 B955 Executing CMDRJE
The command device being used at the local RAID Manager
exists under the port. 1039 B955 Executing CMDRJE
The program product is not installed. 104F B955 Executing CMDRJE
Invalid host speed is set for the 4Gbps fibre adapter. The
available host speeds are AUTO, 1G, 2G, and 4G only. 113D B955 Executing CMDRJE
Invalid host speed is set for the 8Gbps fibre adapter. The
available host speeds are AUTO, 2G, 4G, and 8G only. 113F B955 Executing CMDRJE
The other than "10G" cannot be specified when specifying a
host speed of the package for Fibre Channel over Ethernet. 11A5 B955 Executing CMDRJE
Table 60 SSB codes that are returned by raidcom add ldev command
raidcom add ldev
Description Error code Executing/
Async Error message
SSB2 SSB1
It exceeds the range of LDEV number. 0000 2E00 Executing CMDRJE
Cannot create because the specified capacity is invalid. 0002 2E00 Executing CMDRJE
SSID is not in the effective range. 0003 2E00 Executing CMDRJE
The value of specified emulation type is invalid. 000D 2E00 Executing CMDRJE
The specified emulation type is not supported in this command. 000E 2E00 Executing CMDRJE
A Thin Provisioning virtual volume cannot be created because
the specified LDEV number is already used. 0010 2E00 Executing CMDRJE
There are not enough cache management devices. 0013 2E00 Asynchronous Get Command Status
Cannot create because the specified capacity is invalid. 0014 2E00 Asynchronous Get Command Status
The capacity in the case of specifying a emulation type of the
mainframe series must be dividable by the cylinder. 0019 2E00 Executing CMDRJE
The capacity when 3390-V emulation type is specified must be
divisible by page unit. 001A 2E00 Executing CMDRJE
When you specify emulation type for open system, you cannot
specify the size by the cylinder. 001C 2E00 Executing CMDRJE
A volume for online data migration cannot be created because
the specified value of capacity (LBA) is not the maximum. 0025 2E00 Executing
Async
CMDRJE
Get Command Status
The capacity must be specified because LDEVs are in the parity
group (or the external volume group). 0026 2E00 Executing CMDRJE
The capacity must be specified. 0027 2E00 Executing CMDRJE
The emulation type of the mainframe cannot be specified
because the virtual volume is set for the specified LDEV. 002D 2E00 Async Get Command Status
238 Troubleshooting