HP XP7 Storage - Manual (Page 256)

Table 76 SSB codes that are returned by raidcom add lun command (continued)
raidcom add lun
Description Error code Executing/
Async Error message
SSB2 SSB1
An invalid LDEV exists in the specified LDEVs. 0994 B958 Executing CMDRJE
The LU path cannot be added because the virtual LDEV ID of
the specified volume was deleted. 0996 B958 Executing CMDRJE
Table 77 SSB codes that are returned by raidcom modify pool command
raidcom modify pool
Description Error code Executing/
Async Error message
SSB2 SSB1
The value of pool ID is invalid. 6000 2E00 Executing CMDRJE
The specified pool is for Fast Snap or Snapshot. 6001 2E00 Executing CMDRJE
The value of maximum reserve ratio is out of range, or it falls
below the maximum reserve ratio of the V-VOL. 6002 2E00 Executing CMDRJE
The specified Tier Range value is invalid. 6003 2E00 Executing CMDRJE
Relations between the specified lower limit of Tier Range and
the Delta value is invalid. 6004 2E00 Executing CMDRJE
The specified Tier capacity threshold value is out of range. 6006 2E00 Executing CMDRJE
The threshold of the specified High water mark is out of range. 6009 2E00 Executing CMDRJE
The operation cannot be done because the specified threshold
of Warning is larger than the threshold of the specified High
water mark. 600A 2E00 Executing CMDRJE
The specified tier number is out of range. 6100 2E00 Executing CMDRJE
The operation cannot be done because the total capacity of
virtual volumes for Smart Tiers in the system exceeds the
maximum. 001F 2E10 Executing CMDRJE
The specified pool is in the state of blocked. 600B 2E10 Executing CMDRJE
The setting of the threshold value is less than the pool usage
value. 600C 2E10 Async Get Command Status
The operation cannot be done because it is in the state of
shrinking. 600D 2E10 Executing CMDRJE
The operation cannot be done because it is being discarded
pages. 6011 2E10 Executing CMDRJE
Pool cannot be restored because the usage rate of pool is 100%. 6012 2E10 Async Get Command Status
The operation cannot be done because the Tier is being deterred
reallocation. 6015 2E10 Executing CMDRJE
The operation cannot be done because collecting the
performance monitoring data is being prepared. 6017 2E10 Executing CMDRJE
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
The Smart Tiers operations cannot be done to the pool because
the specified pool contains RAID 1 pool VOLs. 6000 2E13 Executing CMDRJE
256 Troubleshooting