HP XP7 Storage - Manual (Page 227)

Table 48 Generic error codes (raidscan, raidqry, raidar, horcctl)
Value Error message Error code Category
254 Required Arg list EX_REQARG Syntax for Argument
(Unrecoverable)
253 Invalid argument EX_INVARG
249 Invalid name of option EX_INVNAM
252 Unknown option EX_UNWOPT
238 Unknown function code EX_UNWCOD
230 Unknown command EX_UNWCMD
244 Result too large EX_ERANGE
243 File name too long EX_ENAMLG
226 Invalid return code EX_INVRCD
227 No such LDEV within the RAID EX_ENLDEV Configuration
(Unrecoverable)
219 No such RAID unit EX_ENOUNT
220 Invalid mu# with HORC or HOMRCF EX_INVMUN
211 Permission denied with the RAID EX_ERPERM
210 Microcode not supported EX_ENOSUP
207 Permission denied with the SLPR EX_ESPERM
237 Control command I/O error EX_CMDIOE Command I/O to RAID
(Recoverable)
248 A specified option is invalid EX_OPTINV
241 Invalid RAID command mode EX_INVMOD
240 Invalid RAID command EX_INVCMD
251 Can't be attached to HORC manager EX_ATTHOR Communication for HORCM
(Recoverable)
250 Can't be attached to a Debug layer EX_ATTDBG
255 Can't be communicated with HORC manager EX_COMERR
245 Not enough core EX_ENOMEM Resource
(Unrecoverable)
Specific error codes
The following table lists the specific error codes returned by these commands:
•
horctakeover
•
paircurchk , paircreate, pairsplit, pairresync, pairevtwait, pairvolchk,
pairsyncwait , raidvchkset
In this table, "Unrecoverable" indicates errors that cannot be recovered by reexecuting the
command, and "Recoverable" indicates errors that can be recoverable by reexecuting the command.
See the HP XP7 RAID Manager Reference Guide for more information on error codes for each
command.
Error messages and error codes 227