HP XP7 Storage - Manual (Page 60)

Table 15 Commands and operation authority managed by Remote Web Console and SVP (continued)
Operation authority (Role) Executable command Authority Operation target Operation
Storage Administrator (System
Resource Management) raidcom modify port
-port_attribute Port attribute setting
authority Port
Storage Administrator
(Provisioning) raidcom modify port -loop_id
raidcom modify port -topology
Port setting authority
raidcom modify port
-port_speed
Storage Administrator
(Provisioning) raidcom add host_grp Host group setting
authority Host group
Storage Administrator
(Provisioning) raidcom set hba_wwn
raidcom reset hba_wwn
WWN setting
authority WWN
Storage Administrator
(Provisioning) raidcom modify ldev
-ldev_name LDEV nickname
setting authority LDEV nickname
Storage Administrator (Local
Copy) pairresync Pairsplit and resync
authority Local copy
Storage Administrator (Remote
Copy) raidcom add rcu
raidcom delete rcu
Environment
construction authority Remote copy
raidcom modify rcu
raidcom add rcu_path
raidcom delete rcu_path
raidcom add journal
raidcom delete journal
raidcom modify journal
Storage Administrator (Remote
Copy) pairresync Pairsplit and resync
authority
Relation between resource groups and command operations
The operation for using resource groups are different by the command devices (the In-Band method)
or the Out-of-Band method that are used when you start RAID Manager.
You can create resource groups for each resource. And you can share them with multiple users.
When user 10 and user 20 share the port like the following figure, the relation between the
command devices and resource groups that user can use is like
Table 16 (page 61) .
60 RAID Manager functions on the P9500 and XP7 Storage