HP XP7 Storage - Manual (Page 269)

Table 82 SSB codes returned by raidcom modify snapshot (continued)
raidcom modify snapshot
Description Error code Executing/Async Error message
SSB2 SSB1
A Snapshot data cannot be obtained because the
Continuous Access Synchronous asynchronous pair status 004D 2E10 Executing CMDRJE
is other than PSUS or PSUE when the volume is shared
between the P-VOL of a Fast Snap/Snapshot pair and the
S-VOL of a Continuous Access Synchronous asynchronous
pair.
The operation cannot be performed because the Quick
Restore is being operated on the specified Business Copy
P-VOL. 004E 2E10 Executing CMDRJE
A pair operation cannot be performed because the volume
using two mirrors included in the 3DC multi-target 0051 2E10 Executing CMDRJE
configuration, 3DC cascade configuration or 3DC delta
resync configuration by the three Continuous Access Journal
sites is specified.
A Fast Snap pair operation cannot be performed because
the pair status of all Fast Snap pairs sharing the specified
P-VOL is PSUE. 0052 2E10 Executing CMDRJE
The Fast Snap pair operation cannot be performed because
the virtual LDEV ID of the specified volume was deleted. 0061 2E10 Executing CMDRJE
A Fast Snap or Snapshot pair cannot be created due to
unavailable of the pool. 6018 2E10 Executing CMDRJE
A Snapshot data cannot be obtained because the pool or
the pool-VOL is blocked. 6019 2E10 Executing CMDRJE
A Fast Snap or Snapshot pair cannot be created because
there are not enough pair tables. 8100 2E10 Executing CMDRJE
A Fast Snap or Snapshot pair cannot be created because
there are not enough differential tables. 8101 2E10 Executing CMDRJE
A pair cannot be created because there is not enough free
shared memory space. 8102 2E10 Executing CMDRJE
The command ends abnormally because other than the
raidcom add snapshot command is issued for the volume
other than the Fast Snap or Snapshot pair. 9700 2E10 Executing CMDRJE
The command ends abnormally because the pair is in the
state of unacceptable the command. 9701 2E10 Executing CMDRJE
The Fast Snap or Snapshot pair cannot be restored because
the volume is shared between the P-VOL of a Fast 9702 2E10 Executing CMDRJE
Snap/Snapshot pair and the S-VOL of a Continuous Access
Synchronous pair.
The Fast Snap or Snapshot pair cannot be restored because
the volume is shared between the P-VOL of a Fast 9703 2E10 Executing CMDRJE
Snap/Snapshot pair and the S-VOL of a Continuous Access
Journal pair.
Error messages and error codes 269