HP XP7 Storage - Manual (Page 260)

Table 80 SSB codes that are returned by raidcom add snap_pool command (continued)
raidcom add snap_pool
Description Error code Executing/
Async Error message
SSB2 SSB1
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
The specified LDEV is not installed. 0000 2E20 Async Get Command Status
The operation cannot be performed because the memory
capacity of the shared memory (SM) is insufficient. 8103 2E21 Async Get Command Status
The operation cannot be done because the SM for Fast Snap
or Snapshot is not initialized. 8106 2E21 Async Get Command Status
Fast Snap or Snapshot program product is not installed. 9007 2E21 Executing CMDRJE
Exceeded the number of pool volume that can be registered in
a pool. 0005 2E22 Async Get Command Status
The larger number of drive types than the supported
configuration cannot be added to the specified pool. 000D 2E22 Async Get Command Status
Pool volume cannot be registered because the drive type of
specified LDEV is different from the other pool volume type, or
the drive type in the pool exceeds the three. 6100 2E22 Async Get Command Status
The number of specified LDEVs is invalid. 0008 2E23 Executing CMDRJE
The emulation type of specified LDEV cannot be used as a pool
VOL. 0000 2E30 Async Get Command Status
The specified LDEV has the LU path definition. 0007 2E30 Async Get Command Status
The specified LDEV is used as a External Storage Access
Manager quorum disk. 000C 2E30 Async Get Command Status
The specified LDEV is used as a system disk. 000D 2E30 Async Get Command Status
The specified LDEV is already used as a pool volume. 000E 2E30 Async Get Command Status
The specified LDEV is a command device. 0010 2E30 Async Get Command Status
It cannot be used as a pool volume because the size of specified
LDEV is less than 8GB. 0038 2E30 Async Get Command Status
Creating a pool or adding a pool volume cannot be done
because CLPR is mixed in the specified pool. 0039 2E30 Async Get Command Status
The specified LDEV is used as a V-VOL. 005C 2E30 Async Get Command Status
The specified LDEV is used in another program product. 005E 2E30 Async Get Command Status
An LDEV, whose emulation type is not available to be mixed,
is in the specified LDEVs. 006C 2E30 Executing CMDRJE
The emulation type of the specified volume is not OPEN-V. 006D 2E30 Executing CMDRJE
The operation cannot be done for the following reasons: 006E 2E30 Async Get Command Status
• The pool volumes include external volumes whose cache
modes are invalid.
•
The pool includes both external volumes whose cache modes
are invalid and internal volumes.
A pool volume cannot be added because the LDEV of the
resource group different from the resource group of the pool
volume to which the specified pool belongs is specified. 0071 2E30 Executing
Async
CMDRJE
Get Command Status
260 Troubleshooting