HP XP7 Storage - Manual (Page 239)

Table 60 SSB codes that are returned by raidcom add ldev command (continued)
raidcom add ldev
Description Error code Executing/
Async Error message
SSB2 SSB1
The parity group number or the external group number is not in
the effective range. 0101 2E00 Executing CMDRJE
Failed to restore the LDEV that is created to external volume
group. 1005 2E00 Async Get Command Status
The specified pool ID is not in the effective range. 6000 2E00 Executing CMDRJE
The total capacity of Thin Provisioning V-VOL which is defined
in the specified pool exceeds the permitted capacity in the pool. 6002 2E00 Asynchronous Get Command Status
The specified CLPR number is not in the effective range. 7000 2E00 Executing CMDRJE
MP Blade ID is not in the effective range. 8301 2E00 Executing CMDRJE
The specified LDEV is used as a Compatible FlashCopy
relationship. 0003 2E10 Executing CMDRJE
The operation cannot be done because the total capacity of
virtual volumes for Smart Tiers in the system exceeds the
maximum. 001F 2E10 Async Get Command Status
The operation cannot be performed because the following
information of the migration source and the migration target
does not match. 005A 2E10 Async Get Command Status
•
serial number
• product ID
•
emulation type
• SSID
•
LUSE
• CVS configuration
•
LDEV number
The volumes cannot be added because the encryption value of
the key number that is set to encryption ECC is invalid. 0100 2E10 Async Get Command Status
The volumes cannot be added because the check sum of the
encryption key is not coincident. 0101 2E10 Async Get Command Status
The specified pool be associated with the virtual volume of Thin
Provisioning because the state of the pool is incorrect. 6014 2E10 Executing
/Async
CMDRJE
Get Command Status
An LDEV that is in the state of shredding is included in the parity
group of the target LDEV. 0003 2E11 Async Get Command Status
An LDEV that is in the state of formatting is included in the parity
group of the target LDEV. 0004 2E11 Async Get Command Status
An LDEV that is in the state of executing quick format is included
in the parity group of the target LDEV. 0005 2E11 Async Get Command Status
The specified LDEV is used in another operation. 0053 2E11 Executing CMDRJE
The parity group of the target LDEV is in the state of correction
copy. 0102 2E11 Async Get Command Status
The parity group or the external volume group that the specified
LDEV is belongs to is used in another operation. 0153 2E11 Executing CMDRJE
Error messages and error codes 239