HP XP7 Storage - Manual (Page 283)

Table 93 SSB codes that are returned by raidcom delete ldev command (continued)
raidcom delete ldev
Description Error code Executing/
Async Error message
SSB2 SSB1
The specified LDEV is used as a journal volume. 000F 2E30 Async Get Command Status
The specified LDEV is used in the FICON® Data Migration. 0006 2E30 Async Get Command Status
The specified LDEV is a command device. 0010 2E30 Async Get Command Status
The specified volume cannot be deleted because it is a LUSE
volume. 0013 2E30 Executing
Async
CMDRJE
Get Command Status
This is a volume that the Data Retention is set. 0018 2E30 Async Get Command Status
Volume Security for Mainframe is set to the specified LDEV. 001A 2E30 Async Get Command Status
The specified LDEV cannot be deleted because of online from
the mainframe host. 001E 2E30 Async Get Command Status
The specified LDEV is a Data Retention/Volume Retention
attribute device. 004E 2E30 Async Get Command Status
This is a volume that the Volume Retention is set. 0053 2E30 Async Get Command Status
The specified LDEV is used as a Compatible FlashCopy or a
Compatible FlashCopy SE relationship. 0054 2E30 Async Get Command Status
The specified LDEV is used as a Auto LUN. 0055 2E30 Async Get Command Status
The specified LDEV is used as a Auto LUN 0056 2E30 Async Get Command Status
The specified LDEV is used as a system disk. 0057 2E30 Async Get Command Status
The specified LDEV is used as a system disk. 0058 2E30 Async Get Command Status
The specified LDEV is a command device. 0060 2E30 Async Get Command Status
The specified LDEV cannot be operated because it is an external
volume mapped for online data migration. 0074 2E30 Async Get Command Status
The specified volume is used as a Continuous Access
Synchronous. 4102 2E30 Async Get Command Status
The specified volume is used as a Continuous Access
Synchronous. 4103 2E30 Async Get Command Status
The specified volume is used as a Business Copy. 4104 2E30 Async Get Command Status
The specified volume is used as a Business Copy. 4105 2E30 Async Get Command Status
The specified volume is used as a Business Copy. 4107 2E30 Async Get Command Status
The specified LDEV is used as a reserved volume of Auto LUN
V2. 4108 2E30 Async Get Command Status
The target LDEV is a ESAM Quorum disk and cannot be deleted. 0001 2E31 Async Get Command Status
The command cannot be accepted. After a while, execute the
same command. 00EE 2EE8 Executing CMDRJE
An internal error occurred. 0A18 2EE8 Async Get Command Status
An internal error occurred. Call HP Technical Support. FEEC 2EE8 Executing CMDRJE
Async Get Command Status
An internal error occurred. FFFB 2EE8 Async Get Command Status
Call HP Technical Support.
Error messages and error codes 283