HP XP7 Storage - Manual (Page 255)

Table 76 SSB codes that are returned by raidcom add lun command (continued)
raidcom add lun
Description Error code Executing/
Async Error message
SSB2 SSB1
The other than HMDE volume or OPEN volume is included in
the specified LDEV. 0155 B958 Executing CMDRJE
An LU path has already defined in the relevant LDEV. 015A B958 Executing CMDRJE
An invalid LDEV exists in the specified LDEVs. 015D B958 Executing CMDRJE
It exceeds the maximum LUN under the port. 015E B958 Executing CMDRJE
LDEV is set as a pool volume. 0178 B958 Executing CMDRJE
LUN path cannot be set because the LDEV is a system disk. 017B B958 Executing CMDRJE
LUN path cannot be set because the LDEV is a journal volume. 017C B958 Executing CMDRJE
LUN path cannot be set because the access attribute of LDEV
Data Retention is reserved. 017D B958 Executing CMDRJE
When the host mode is External Storage(0x4C), the LUN path
cannot be set in the other than the external volume. 01A3 B958 Executing CMDRJE
The host group and the LDEV that configure the LU path do not
exist in the same virtual storage machine. 01F2 B958 Executing CMDRJE
The LU path definition cannot be set because the virtual LDEV
information of the specified LDEV is not defined yet. 01F3 B958 Executing CMDRJE
Command device cannot be set because it is reserved for Auto
LUN. 0601 B958 Executing CMDRJE
Command device cannot be set because it is an Business Copy
pair/or it is reserved. 0606 B958 Executing CMDRJE
The command device cannot be operated because it is used at
the local RAID Manager. 0639 B958 Executing CMDRJE
A command device cannot be set because LDEV is other than
the OPEN volume. 064A B958 Executing CMDRJE
The specified LDEV is not installed. 065D B958 Executing CMDRJE
A command device cannot be set because LDEV is the virtual
volume of Fast Snap or Snapshot. 0679 B958 Executing CMDRJE
The command cannot be operated because the virtual LDEV is
not defined yet. 0927 B958 Executing CMDRJE
The value of LUN exceeds the maximum. 0944 B958 Executing CMDRJE
The value of LDEV exceeds the maximum. 0945 B958 Executing CMDRJE
Another LDEV is already mapped to the specified LUN. 0947 B958 Executing CMDRJE
The value of Host group ID exceeds the maximum. 0956 B958 Executing CMDRJE
The program product is not installed. 0957 B958 Executing CMDRJE
The specified host group is not installed. 0959 B958 Executing CMDRJE
An invalid LDEV exists in the specified LDEVs. 095D B958 Executing CMDRJE
The multiple LDEV cannot be specified. 098C B958 Executing CMDRJE
When the host mode option 60 is set, LUN path of LUN0 cannot
be set or released. 098D B958 Executing CMDRJE
Error messages and error codes 255