HP XP7 Storage - Manual (Page 282)

Table 93 SSB codes that are returned by raidcom delete ldev command
raidcom delete ldev
Description Error code Executing/
Async Error message
SSB2 SSB1
It exceeds the range of LDEV number. 0000 2E00 Executing CMDRJE
This command does not support the emulation type of the
specified LDEV. 000E 2E00 Async Get Command Status
The specified LDEV is used as a pair of Business Copy/Fast
Snap/Snapshot/Auto LUN V2 or a relationship of Compatible
FlashCopy/Compatible FlashCopy SE. 0000 2E10 Async Get Command Status
The specified LDEV is used as a Continuous Access Synchronous
pair, a Continuous Access Journal pair or a command device
defined by Business Continuity Manager. 0001 2E10 Async Get Command Status
The specified LDEV is used as a Continuous Access Journal pair
or a journal. 0002 2E10 Async Get Command Status
The specified LDEV is used as a Compatible FlashCopy
relationship. 0003 2E10 Async Get Command Status
The specified LDEV is used as a Fast Snap or Snapshot pair. 0004 2E10 Async Get Command Status
The specified LDEV is used as a Auto LUN. 0005 2E10 Async Get Command Status
The specified LDEV is used as a system disk. 0008 2E10 Async Get Command Status
The specified LDEV is used as a CC/XRC attribute device. 0012 2E10 Async Get Command Status
An LDEV that is in the state of formatting is included in the parity
group of the target LDEV. 0004 2E11 Async Get Command Status
An LDEV that is in the state of executing quick format is included
in the parity group of the target LDEV. 0005 2E11 Async Get Command Status
The specified LDEV is used in another operation. 0053 2E11 Executing CMDRJE
The parity group of the target LDEV is in the state of correction
copy. 0102 2E11 Async Get Command Status
The parity group or the external volume group that the specified
LDEV is belongs to is used in another operation. 0153 2E11 Executing CMDRJE
The operation of Thin Provisioning V-VOL cannot be done
because there is a blocked pool. 6004 2E11 Async Get Command Status
The operation cannot be done because the internal processing
is in progress. 8004 2E11 Async Get Command Status
The storage system is in internal process, or the configuration
changing processes are conflicting. 8010 2E11 Executing CMDRJE
The operation cannot be done because there is blocked part in
the system. 8108 2E11 Async Get Command Status
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
LDEV is not installed. 0000 2E20 Executing CMDRJE
Async Get Command Status
An LU path has been defined. 0007 2E30 Executing CMDRJE
The specified LDEV is used as a Thin Provisioning. 000A 2E30 Async Get Command Status
The specified LDEV is used as a pool volume. 000E 2E30 Async Get Command Status
282 Troubleshooting