HP XP7 Storage User Manual
Page 267
Table 81 SSB codes returned by raidcom add snapshot (continued)
raidcom add snapshot
Description
Error code
Executing/Async
Error message
SSB2
SSB1
A pair cannot be created because the volume is already
used in the S-VOL of a Fast Snap or Snapshot pair is
specified as the S-VOL.
0078
2E30
Executing
CMDRJE
The command ends abnormally because the volume other
than OPEN-V is specified as the P-VOL of a Fast Snap or
Snapshot pair.
007A
2E30
Executing
CMDRJE
A pair cannot be created because the volume that is set
the command device is specified as the P-VOL of a Fast
Snap or Snapshot pair.
007B
2E30
Executing
CMDRJE
The command ends abnormally because the volume other
than OPEN-V is specified as the S-VOL of a Fast Snap or
Snapshot pair.
007C
2E30
Executing
CMDRJE
A pair cannot be created because the volume that is set
the command device is specified as the S-VOL of a Fast
Snap or Snapshot pair.
007D
2E30
Executing
CMDRJE
The command ends abnormally because the volume that
has no path definition is specified as the P-VOL of a Fast
Snap or Snapshot pair.
007E
2E30
Executing
CMDRJE
The command ends abnormally because the volume that
has no path definition is specified as the S-VOL of a Fast
Snap or Snapshot pair.
007F
2E30
Executing
CMDRJE
The command ends abnormally because the external
volume mapped for the online data migration is specified
as the P-VOL of a Fast Snap or Snapshot pair.
0080
2E30
Executing
CMDRJE
The command ends abnormally because the external
volume mapped for the online data migration is specified
as the S-VOL of a Fast Snap or Snapshot pair.
0081
2E30
Executing
CMDRJE
A pair cannot be created because the attribute of the pool
is other than Fast Snap or Snapshot is specified.
600E
2E30
Executing
CMDRJE
A pair cannot be created because the capacity exceeds
the licensed capacity.
9002
2E31
Executing
CMDRJE
The specified operation is not supported in the current
microcode version.
8000
2E3F
Executing
CMDRJE
An internal error occurred. Call HP Technical Support.
FEEC
2EC6
Executing
CMDRJE
Table 82 SSB codes returned by raidcom modify snapshot
raidcom modify snapshot
Description
Error code
Executing/Async
Error message
SSB2
SSB1
The value exceeds the range of LDEV number.
0000
2E00
Executing
CMDRJE
The MU number exceeds the maximum.
000B
2E00
Executing
CMDRJE
The command ends abnormally because the volume out of
the range of LDEV number is specified as the P-VOL of a
Fast Snap or Snapshot pair.
0028
2E00
Executing
CMDRJE
Error messages and error codes 267