HP XP7 Storage - Manual (Page 236)

Table 56 SSB codes that are returned by raidcom modify external_grp command (continued)
raidcom modify external_grp
Description Error code Executing/
Async Error message
SSB2 SSB1
There is no external volume group. 4100 2E20 Executing CMDRJE
The specified MP Blade is not installed. 8300 2E20 Executing CMDRJE
The attribute cannot be changed because the external volume
is used as a Business Copy pair volume. 4104 2E30 Executing CMDRJE
The external volume is used as a Continuous Access Journal pair
volume. 410D 2E30 Executing CMDRJE
The external volume is used as a Continuous Access Synchronous
volume. 411A 2E30 Executing CMDRJE
Cache mode cannot be changed because there is an LDEV that
Cache Residency bind mode is set. 000C 2E31 Executing CMDRJE
Cache mode cannot be changed because the specified external
volume includes a pool volume or an LDEV that is used by LUSE. 4101 2E31 Executing CMDRJE
The cache mode cannot be changed because one of the
following applies to the specified external volume. 4107 2E31 Executing CMDRJE
• A pool volume of the pool that consists of both external
volumes and internal volumes.
•
A pool volume of the pool where the multi tier pool option
is enabled.
The attribute of the external volume cannot be changed from
the current cache mode to the specified cache mode. 4108 2E31 Executing CMDRJE
The attribute cannot be changed because the external volume
group is not mapped for online data migration. 4109 2E31 Executing CMDRJE
The specified command cannot be accepted because the
command is not supported. 00F1 2EDA Executing CMDRJE
An internal error occurred on the changing of an external volume
option. 0905 2EDA Executing CMDRJE
Call HP Technical Support.
The specified parameter is incorrect. Check the HP XP7 RAID
Manager Reference Guide. 0002 2EF3 Executing CMDRJE
Table 57 SSB codes that are returned by raidcom modify port -loop_id command
raidcom modify port -loop_id
Description Error code Executing/
Async Error message
SSB2 SSB1
The specified AL-PA is invalid. 044C B955 Executing CMDRJE
The specified topology is invalid. 054E B955 Executing CMDRJE
The other than "fabric on" cannot be specified when specifying
a topology of the package for Fibre Channel over Ethernet. 05A6 B955 Executing CMDRJE
The other than "P-to-P (point to point)" cannot be specified when
specifying a topology of the package for Fibre Channel over
Ethernet. 05A7 B955 Executing CMDRJE
236 Troubleshooting