HP XP7 Storage - Manual (Page 206)

•
-gplbaex option (Windows 2008/2012 Only)
This option is used for displaying usable LBA on a Physical drive in units of 512 bytes, and
is used to specify [slba] [elba] options for raidvchkset command.
C:\HORCM\Tool>inqraid -CLI -gplbaex hd10,13
Harddisk10 : SLBA = 0x0000003f ELBA = 0x013fe5d9 PCNT = 1 [OPEN-V
]
Harddisk11 : SLBA = 0x00000022 ELBA = 0x013fffdf PCNT = 2 [OPEN-V
]
Harddisk12 : SLBA = 0x00000022 ELBA = 0x013fffdf PCNT = 3 [OPEN-V
]
SLBA: displays usable starting LBA in units of 512 bytes
ELBA: displays usable ending LBA (ELBA -1) in units of 512 bytes
PCNT: displays the number of partitions
Directory mount facility for Windows systems
The attached mountvol command into Windows supports the directory mount, but it does not
support the directory mount function that flushes the system buffer associated to a logical drive
such as in UNIX systems. The directory mount structure on Windows is only symbolical link between
a directory and Volume{guid}, illustrated in
Figure 66 (page 206) below. As such, RAID Manager
supports the function to discover the mounted volumes by a directory, and supports the operation
to mount/unmount with the subcommand option.
Figure 66 Directory mount structure
Volume discovery for directory mounted volume: RAID Manager can discover the directory mounted
volume by using $LETALL that shows the relationship between logical drive and the physical volumes.
The KEY WORD ($LETALL)can also be used with the raidscan -find and mkconf commands.
D:\HORCM\etc>inqraid $LETALL -CLI
DEVICE_FILE PORT SERIAL LDEV CTG H/M/12 SSID R:Group PRODUCT_ID
D:\Vol2\Dsk7 - - - - - - - DDRS-34560D
D:\hd1\Vol8\Dsk0 CL2-F 61459 448 - s/s/ss 0005 1:01-01 OPEN-3
D:\hd2\Vol9\Dsk1 CL2-F 61459 449 - s/s/ss 0005 1:01-01 OPEN-3
G:\Dms1\Dsk2 CL2-K 61456 256 - s/s/ss 0005 1:01-11 OPEN-3
G:\Dms1\Dsk3 CL2-K 61456 257 - s/s/ss 0005 1:01-11 OPEN-3
G:\Dms1\Dsk4 CL2-K 61456 258 - s/s/ss 0005 1:01-11 OPEN-3
Subcommand for directory mounted volume: RAID Manager supports the directory mount with the
-x mount
,-x unmount,-x sync option so that the directory mount can be used to
mount/unmount the S-VOL.
206 Examples of using RAID Manager commands