HP XP7 Storage - Manual (Page 226)

Table 47 Generic error codes (horctakeover and pair commands) (continued)
Return
Value Error message Error code Category
239 No such group EX_ENOGRP Configuration
(Unrecoverable)
247 No such device or group EX_ENOENT
246 No such device EX_ENODEV
227 No such LDEV within the RAID EX_ENLDEV
219 No such RAID unit EX_ENOUNT
220 Invalid mu# with HORC or HOMRCF EX_INVMUN
218 Unmatched Serial# vs RAID unitID EX_ENQSER
216 Extended CTgroup across RAIDs EX_EXTCTG
214 Unmatched CTGID within the group EX_ENQCTG
213 Permission denied with the LDEV EX_ENPERM
211 Permission denied with the RAID EX_ERPERM
207 Permission denied with the SLPR EX_ESPERM
221 An order to the control/command was rejected EX_CMDRJE Command I/O to RAID
(Recoverable)
237 Control command I/O error, or rejected EX_CMDIOE
248 A specified option is invalid EX_OPTINV
241 Invalid RAID command mode EX_INVMOD
240 Invalid RAID command EX_INVCMD
251 Cannot be attached to HORC manager EX_ATTHOR Communication for HORCM
(Recoverable)
250 Cannot be attached to a Debug layer EX_ATTDBG
255 Cannot be communicate with HORC manager EX_COMERR
242 No remote host alive for remote commands, or Remote
RAID Manager might be blocked (sleeping) on an existing
I/O. EX_ENORMT Recoverable
245 Not enough core EX_ENOMEM Resource
(Unrecoverable)
Generic error codes (raidscan, raidqry, raidar, horcctl)
The following table lists the generic error codes returned by these commands:
•
raidscan
•
raidqry
•
raidar
•
horcctl
In this table, "Unrecoverable" indicates errors that cannot be recovered by reexecuting the
command, and "Recoverable" indicates errors that can be recoverable by reexecuting the command.
226 Troubleshooting