HP XP7 Storage - Manual (Page 240)

Table 60 SSB codes that are returned by raidcom add ldev command (continued)
raidcom add ldev
Description Error code Executing/
Async Error message
SSB2 SSB1
The operation cannot be done because the internal processing
is in progress. 8004 2E11 Async Get Command Status
The storage system is in internal process, or the configuration
changing processes are conflicting. 8010 2E11 Executing CMDRJE
Cache segment size is incorrect. 8105 2E11 Async Get Command Status
The operation cannot be done because there is blocked part in
the system. 8108 2E11 Async Get Command Status
The command cannot be accepted. After a while, execute the
same command. 9400 2E11 Executing CMDRJE
The specified CLPR does not exist. 0007 2E20 Executing/ CMDRJE
Async Get Command Status
There is no parity group. 0100 2E20 Executing CMDRJE
Pool ID is invalid. 6000 2E20 Executing/ CMDRJE
Async Get Command Status
The specified MP Blade is not installed. 8300 2E20 Async Get Command Status
There is not enough free shared memory space. 6003 2E21 Asynchronous Get Command Status
Package for Mainframe is required when you specify the
emulation type of mainframe. 8300 2E21 Asynchronous Get Command Status
The program product is not installed. 9001 2E21 Executing CMDRJE
The program product is not installed. 9002 2E21 Executing CMDRJE
The program product is not installed. 9004 2E21 Executing/Async CMDRJE/Get
Command Status
Compatible FlashCopy SE program product is not installed. 900E 2E21 Executing CMDRJE
LDEV is already defined. 0001 2E22 Executing CMDRJE
You cannot create the volume because the size of the specified
external volume group exceeds the maximum capacity of the
external volume for online data migration. 000F 2E22 Executing CMDRJE
The number exceeds the maximum number of LDEV that can be
created in the current system configuration. 0001 2E23 Executing/
Async
CMDRJE
Get Command Status
The specified LDEV is used in the FICON® Data Migration. 0006 2E30 Async Get Command Status
The specified SSID is already used in another CU. 0020 2E30 Executing CMDRJE
The SSID is allocated to the CU already. 0021 2E30 Executing CMDRJE
The specified volume is used as an alias device in Parallel Access
Volumes. 0025 2E30 Asynchronous Get Command Status
An LDEV of another emulation type is allocated in the range
where the number is divided into each 32LDEVs. 0026 2E30 Async Get Command Status
The emulation type that cannot be mixed with is specified. 004C 2E30 Executing CMDRJE
The number of ldevs exceeds the maximum number of ldevs that
can be created in the parity group or the external volume group. 004D 2E30 Executing CMDRJE
240 Troubleshooting