HP XP7 Storage - Manual (Page 235)

Table 55 SSB codes that are returned by raidcom disconnect external_grp command (continued)
raidcom disconnect external_grp
Description Error code Executing/
Async Error message
SSB2 SSB1
The specified external volume belongs to a Fast Snap or
Snapshot where the pair in the PSUS status exists. 6005 2E11 Executing CMDRJE
There is no specified external volume. 4100 2E20 Executing CMDRJE
There is no specified path. 4300 2E20 Executing CMDRJE
It is included the Thin Provisioning volume that is associated with
a pool. 000A 2E30 Executing CMDRJE
It is used as a pool volume. 000E 2E30 Executing CMDRJE
It is used as a journal volume. 000F 2E30 Executing CMDRJE
It is used as a reserved volume of Auto LUN V2. 0014 2E30 Executing CMDRJE
Volume Security for Mainframe is set. 001A 2E30 Executing CMDRJE
It is used as a remote command device. 001C 2E30 Executing CMDRJE
Online from the mainframe host. 001E 2E30 Executing CMDRJE
This is a volume that the Data Retention is set. 004E 2E30 Executing CMDRJE
The Thin Provisioning volume not in the blocked state is included
in the Thin Provisioning that is associated with the pool to which
the pool volume is belongs. 0061 2E30 Executing CMDRJE
An internal error occurred by the operation of disconnecting the
external volume. 0000 2EDA Executing CMDRJE
Call HP Technical Support.
An internal error occurred by the operation of external volume. 0905 2EDA Executing CMDRJE
Call HP Technical Support.
Table 56 SSB codes that are returned by raidcom modify external_grp command
raidcom modify external_grp
Description Error code Executing/
Async Error message
SSB2 SSB1
The external volume group is not in the effective range. 4100 2E00 Executing CMDRJE
The specified value of the load balance mode is invalid. 410F 2E00 Executing CMDRJE
The specified value of the ALUA mode is invalid. 4110 2E00 Executing CMDRJE
MP Blade ID is not in the effective range. 8301 2E00 Executing CMDRJE
The operation cannot be performed because the volume used
for data migration is reserved from the host. 4202 2E10 Executing CMDRJE
The specified MP Blade is blocked. 8300 2E10 Executing CMDRJE
The attribute cannot be changed because Auto LUN is being
executed. 4107 2E11 Executing CMDRJE
The load balance mode cannot be changed because the
alternative path mode is set to Single. 4303 2E11 Executing CMDRJE
The load balance mode cannot be changed because microcodes
of multiple versions are in the storage system. 800F 2E11 Executing CMDRJE
Error messages and error codes 235