HP XP7 Storage - Manual (Page 219)

Table 46 Command error messages
Value Recommended action Condition Error Error code
message
255 Verify that HORCM is running by
using UNIX commands [ps - ef |
grep horcm]. This command failed to
communicate with the RAID
Manager software. Can't be
communicate with
HORC Manager EX_COMERR
254 Please designate the correct option
using the -h option. An option or arguments of
an option are not sufficient. Required Arg list EX_REQARG
253 Please designate the correct option
using the -h option. An option or arguments of
an option are incorrect. Invalid argument EX_INVARG
252 Please designate the correct option
using the -h option. Designated an unknown
option. Unknown option EX_UNWOPT
251 Please verify that HORCM is running
and/or that HORCMINST is set
correctly. Could not connect with
HORCM. Can't be attached to
HORC Manager EX_ATTHOR
250 Verify that HORCM is running by
using UNIX commands [ps - ef |
grep horcm]. Failed to communicate with
HORCM, or cannot make a
log directory file. Can't be attached to
a Debug layer EX_ATTDBG
249 Please designate the correct name
using the -h option. The name specified in an
argument of an option is not
appropriate. Invalid name of
option EX_INVNAM
248 Contact the HP Technical Support. Detected contradiction in
information that RAID
reported. A specified option is
invalid EX_OPTINV
247 Verify the device or group name and
add it to the configuration file of the
remote and local hosts. The designated device or
group name does not exist
in the configuration file. No such device or
group EX_ENOENT
246 Verify the device name and add it
to the configuration file of the remote
and local hosts. The designated device name
does not exist in the
configuration file. No such device EX_ENODEV
219 Verify the RAID unit ID and add it to
the configuration file of the remote
and local hosts. The designated RAID unit ID
does not exist in the
configuration file. No such RAID unit EX_ENOUNT
218 Confirm the serial# (Seq#) of the
storage system using the The group designated by
Business Copy paircreate Unmatched Serial#
vs RAID unitID EX_ENQSER
pairdisplay command, or does not have the same
RAID unit, or the unitID is not confirm that the serial# (Seq#) and
identical to the unit ID in the
same RAID serial# (Seq#).
the unit ID of storage system are the
same among hosts using the
raidqry -r
command.
245 Increase the virtual memory capacity
of the system, or close any Insufficient memory exists. Not enough core EX_ENOMEM
unnecessary programs and/or
daemon processes.
131 Confirm the execution right,
permission the extension, the
execution path of the script file. The script file specified by
the -zt option cannot be
performed. Cannot execute
script file EW_ENESCR
Error messages and error codes 219