beautypg.com

Removing a drive blank, 73 installing and removing a drive blank – HP 3000 Enterprise Virtual Array User Manual

Page 202

background image

Customer Replaceable Units

202

Enterprise Virtual Array 3000 User Guide

4. Insert the drive blank into the enclosure bay until locking tabs 1 and 2

engage the enclosure. See

Figure 73

.

Figure 73: Installing and removing a drive blank

Removing a Drive Blank

Complete the following procedure to remove a drive blank.

1. Grasp the drive blank by the two tabs, 1 and 2 in

Figure 73

.

2. Lift up on the bottom tab 1 and pull the blank out of the enclosure.

CXO7359A˚

1

2