HP 3000 Enterprise Virtual Array - Manual (Page 194)

HSV Controller Fault Management
194 Enterprise Virtual Array 3000 User Guide
■ event_ —the type information in the file
■ w010605_ —the NSC base level build string, that is, the file creation date
— 01 —creation year
— 06 —creation month
— 05 —creation date
■ t100 —the NSC software version number string
Table 46 describes types of information available in this file.
Table 46: Controller Event Text Description File
Information Type Description
Event Code This hexadecimal code identifies the reported event
type.
Termination Code (TC) The hexadecimal code specifies the condition that
generated the termination code. It may also define
either a system or user initiated corrective action.
Coupled Crash Control
Codes
These single digit, decimal characters define the
requirement for the other controller to initiate a coupled
crash control
0. Other controller SHOULD NOT complete a coupled
crash.
1. Other controller SHOULD complete a coupled crash.
Dump/Restart Control
Codes
This single decimal character (0, 1, 3) defines the
requirements to:
0. Perform a crash dump and then restart the controller.
1. DO NOT perform a crash dump; just restart the
controller.
3. DO NOT perform a crash dump; DO NOT restart
the controller.
Corrective Action Codes
(CAC)
These hexadecimal codes supplement the Termination
Code information to identify the faulty element and the
recommended corrective action.
Software Component ID
Codes (SWID)
These decimal codes identify software associated with
the event.
Event Information Packets
(EIP)
These codes specify the packet organization for specific
type event.