HP 3000 Enterprise Virtual Array - Manual (Page 193)

HSV Controller Fault Management
193 Enterprise Virtual Array 3000 User Guide
Displaying Detailed Information
The Detail View menu lets you examine detailed fault information stored in the
Last Termination Event Array (LTEA). This array stores information for the last
32 termination events.
Complete the following procedure to display the LTEA information about any of
the last 32 termination events:
Interpreting Fault Management Information
Each version of Command View EVA includes an ASCII text file that defines all
the codes that an HP authorized service representative can view either in
Command View EVA or on the OCP.
Note: This information is for the exclusive use of an HP authorized service
representative.
The file name identifies the file type and the revision date. For example, the file
name hsv100_event_w010605_t100.txt provides the following information:
■ hsv100 —the Network Storage Controller (NSC) model number string, that
is the controller model number
1. When the Fault Management display is
active (Flashing), press T to select the
Detail View menu.
Last Fault
Detail View
The LTEA selection menu is active (LTEA
0 is displayed).
DONE
LTEA [0]
2. Press T or S to increment to a specific
error, LTEA N, in this example.
LTEA [N]
3. Press X to observe data about the selected
error, LTEA N, in this example.
TC: XXXXXXXX IDX: xx
Param [N]: nnnnnnnn