HP 3000 Enterprise Virtual Array - Manual (Page 190)

HSV Controller Fault Management
190 Enterprise Virtual Array 3000 User Guide
Using Command View EVA
Command View EVA provides detailed information about each event affecting
system operation in either a Termination Event display or an Event display. These
displays are similar, but not identical.
GUI Termination Event Display
A problem that generates the Termination Event display prevents the system from
performing a specific function or process. You can use the information in this
display to diagnose and correct the problem.
Note: The major differences between the Termination Event display and the Event
Display are:
■
The Termination Event display includes a Code Flag field; it does not include the EIP
Type field.
■
The Event display includes an EIP type field; it does not include a Code Flag field.
■
The Event display includes a Corrective Action Code field.
The Termination Event display has the following format:
■ Date—The date the event occurred.
■ Time—The time the event occurred.
■ SWCID—Software Identification Code. A hexadecimal number in the range
0–FF that identifies the controller software component reporting the event.
■ Evt No—Event Number. A hexadecimal number in the range 0–FF that is the
software component identification number.
■ Code Flag—An internal code that includes a combination of other flags.
■ Description—The condition that generated the event. This field may contain
information about an individual field’s content and validity.
Date Time SWCID Evt No Code Flag Description