HP 3000 Enterprise Virtual Array - Manual (Page 191)

HSV Controller Fault Management
191 Enterprise Virtual Array 3000 User Guide
GUI Event Display
A problem that generates the Event display reduces the system capabilities. You
can use the information in this display to diagnose and correct problems.
Note: The major differences between the Event Display and the Termination Event
display are:
■
The Event display includes an EIP type field; it does not include a Code Flag field.
■
The Event display includes a Corrective Action Code (CAC) field.
■
The Termination Event display includes a Code Flag field; it does not include the EIP
Type field.
The Event display has the following format:
■ Date—The date the event occurred.
■ Time—The time the event occurred.
■ SWCID—Software Identification Code. A number in the range 1–256 that
identifies the internal firmware module affected.
■ Evt No—Event Number. A hexadecimal number in the range 0–FF that is the
software component identification number.
■ CAC—Corrective Action Code. A specific action to correct the problem.
■ EIP Type—Event Information Packet Type. A hexadecimal character that
defines the event information format.
■ Description—The problem that generated the event.
Date Time SWCID Evt No CAC EIP Type Description