HP 3000 Enterprise Virtual Array - Manual (Page 121)

Storage System Hardware Components
121 Enterprise Virtual Array 3000 User Guide
Restarting the Storage System
To restore a controller to an operational state, use the following procedure to
restart the system.
1. From the OCP menu tree, select Shutdown
System.
Shutdown System
System Password
2. Press
X
to select Restart.
Restart
Power Off
3. Press
T
and go to step 4.
Press
W
to accept NO and return to step 1.
RESTART SYSTEM
NO
4. Press
W
to accept YES and initiate the
restart.
RESTART SYSTEM
YES
5. The storage system performs the startup
procedure.
HSV100 Startup
********************
6. The system automatically loads the Storage
System name and Node WorldWide Name
information from the operational controller.
Storage System Name:
SCELL22MAY200111543
Node WorldWide Name:
5000-1FE1-0000-0000