HP 3000 Enterprise Virtual Array - Manual (Page 161)

161 Enterprise Virtual Array 3000 User Guide
B
EMU Generated Condition
Reports
This appendix provides a description of the EMU generated condition reports that
contain the following information:
■ Element type (et), a hexadecimal number in the range 01 through FF.
■ Element number (en), a decimal number in the range 00 through 99 that
defines a probable cause of the problem.
■ Error code (ec), a decimal number in the range 00 through 99.
■ The recommended corrective action.
The following topics are included in this appendix:
■ Condition Report Format , page 162
■ Correcting Errors , page 163
Note: The conventions used to differentiate between the elements of the condition
report are:
■
The element type has a period after each character.
■
The element number has a period after the second character.
■
The error code has no periods.
The EMU can send error messages to the controller for transmission to the
Command View EVA graphical user interface (GUI). The messages displayed are
specific to Command View EVA and are not within the scope of this publication.
This appendix explains the condition report format, correcting problems, and how
to identify element types. The error codes are arranged in element type sequence
(that is, 0.1., 0.2., 0.3., etc.).