En.01 noncritical condition-high voltage, En.02 critical condition-high voltage, En.03 noncritical condition-low voltage – HP 3000 Enterprise Virtual Array User Manual
Page 183: En.04 critical condition-low voltage, En.01 noncritical condition-high current
EMU Generated Condition Reports
183
Enterprise Virtual Array 3000 User Guide
1.2.en.01 NONCRITICAL Condition—High Voltage
This condition report indicates that an element voltage is approaching, but has not
reached, the high voltage CRITICAL threshold. Continued operation under these
conditions may result in a CRITICAL condition. This condition report remains
active until the problem is corrected.
To correct this problem, record all six characters of the condition report, then
contact your HP authorized service representative.
1.2.en.02 CRITICAL Condition
—
High Voltage
This condition report indicates that an element voltage has reached the high
voltage CRITICAL threshold. This report remains active until the problem is
corrected.
To correct this problem, record all six characters of the condition report, then
contact your HP authorized service representative.
1.2.en.03 NONCRITICAL Condition
—
Low Voltage
This condition report indicates that an element voltage is approaching, but has not
reached, the low voltage CRITICAL threshold. Continued operation under these
conditions may result in a CRITICAL condition. This condition report remains
active until the problem is corrected.
To correct this problem, record all six characters of the condition report, then
contact your HP authorized service representative.
1.2.en.04 CRITICAL Condition
—
Low Voltage
This condition report indicates that an element voltage has reached the low
voltage CRITICAL threshold. This condition report remains active until the
problem is corrected.
To correct this problem, record all six characters of the condition report, then
contact your HP authorized service representative.
1.3.en.01 NONCRITICAL Condition
—
High Current
This condition report indicates that an element current is approaching, but has not
reached, the high current CRITICAL threshold. Continued operation under these
conditions may result in a CRITICAL condition. This condition report remains
active until the problem is corrected.
To correct this problem, record all six characters of the condition report, then
contact your HP authorized service representative.