Replacing the failed component, Replacement instructions – HP EVA P6000 Storage User Manual
Page 85
Table 17 Disk enclosure replaceable parts (continued)
CSR status
Spare part number
Description
•
408765-001
External mini-SAS Cable, 0.5m
•
519318-001
Rackmount kit, 1U/2U
For more information about CSR, contact your local service provider or see the CSR website:
To determine the warranty service provided for this product, see the warranty information website:
To order a replacement part, contact an HP-authorized service provider or see the HP Parts Store
online:
Replacing the failed component
CAUTION:
Components can be damaged by electrostatic discharge (ESD). Use proper anti-static
protection.
•
Always transport and store CRUs in an ESD protective enclosure.
•
Do not remove the CRU from the ESD protective enclosure until you are ready to install it.
•
Always use ESD precautions, such as a wrist strap, heel straps on conductive flooring, and
an ESD protective smock when handling ESD sensitive equipment.
•
Avoid touching the CRU connector pins, leads, or circuitry.
•
Do not place ESD generating material such as paper or non anti-static (pink) plastic in an ESD
protective enclosure with ESD sensitive equipment.
•
HP recommends waiting until periods of low storage system activity to replace a component.
•
When replacing components at the rear of the rack, cabling may obstruct access to the
component. Carefully move any cables out of the way to avoid loosening any connections.
In particular, avoid cable damage that may be caused by:
◦
Kinking or bending.
◦
Disconnecting cables without capping. If uncapped, cable performance may be impaired
by contact with dust, metal or other surfaces.
◦
Placing removed cables on the floor or other surfaces, where they may be walked on or
otherwise compressed.
Replacement instructions
Printed instructions are shipped with the replacement part. Instructions for all replaceable components
are also included on the documentation CD that ships with the P63x0/P65x0 EVA and posted on
the web. For the latest information, HP recommends that you obtain the instructions from the web.
Go to the following web site:
Under Storage, select Disk
Storage Systems, then select HP P6300/P6500 Enterprise Virtual Array Systems under P6000/EVA
Disk Arrays. The manuals page for the P63x0/P65x0 EVA appears. Scroll to the Service and
maintenance information section where the following replacement instructions are posted:
•
HP P6300/P6500 EVA FC Controller Enclosure Replacement Instructions
•
HP P6300/P6500 EVA FC-iSCSI Controller Enclosure Replacement Instructions
Replacing the failed component
85