HP EVA P6000 Storage - Manual (Page 254)

Show perf
Displays the port, read, write, initiator, or target performance in bytes per second.
None Authority
[byte | init_rbyte | init_wbyte | tgt_rbyte | tgt_wbyte
] show perf Syntax
Displays performance data (bytes per second) for all ports. byte Keywords
Displays initiator mode read performance. init_rbyte
Displays initiator mode write performance. init_wbyte
Displays target mode read performance. tgt_rbyte
Displays target mode write performance. tgt_wbyte
Example 1:
MEZ50 (admin) #> show perf
WARNING: Valid data is only displayed for port(s) that are not
associated with any configured FCIP routes.
Port Bytes/s Bytes/s Bytes/s Bytes/s Bytes/s
Number (init_r) (init_w) (tgt_r) (tgt_w) (total)
------ -------- -------- -------- -------- --------
GE1 0 0 6M 6M 12M
GE2 0 0 5M 5M 11M
GE3 0 0 0 0 0
GE4 0 0 0 0 0
FC1 6M 6M 0 0 12M
FC2 5M 5M 0 0 11M
Example 2:
MEZ50 (admin) #> show perf byte
WARNING: Valid data is only displayed for port(s) that are not
associated with any configured FCIP routes.
Displaying bytes/sec (total)... (Press any key to stop display)
GE1 GE2 GE3 GE4 FC1 FC2
------------------------------------------------
11M 10M 0 0 11M 10M
12M 11M 0 0 12M 11M
12M 12M 0 0 12M 12M
12M 12M 0 0 12M 12M
11M 11M 0 0 11M 11M
12M 12M 0 0 12M 12M
12M 11M 0 0 12M 11M
12M 11M 0 0 12M 11M
11M 10M 0 0 11M 10M
12M 12M 0 0 12M 12M
254 Command reference