Help, Fru help – HP EVA P6000 Storage User Manual

Page 220

FRU

Saves and restores the module’s configuration.

Admin session to restore

Authority

restore
save

FRU

Syntax

The fru restore command requires that you first FTP the tar
file containing the configuration to the module. When you issue

restore

Keywords

this command, the system prompts you to enter the restore level.
You can fully restore the module’s configuration (all configuration
parameters and LUN mappings) or restore only the LUN mappings.
The restored configuration does not take effect until the module is
rebooted.

Creates a tar file containing the module’s persistent data,
configuration, and LUN mappings. The file is stored in the module’s
/var/ftp

directory. You must then FTP the tar file from the module.

save

Example1: The following is an example of the fru restore command:

MEZ50 <1>(admin) #> fru restore
A list of attributes with formatting and current values will
follow. Enter a new value or simply press the ENTER key to accept
the current value. If you wish to terminate this process before
reaching the end of the list press 'q' or 'Q' and the ENTER key to
do so.
Type of restore (0=full, 1=mappings only) [full]
FRU restore completed.
Please reboot the system for configuration to take affect.

Example 2: The following is an example of the fru save command:

MEZ50 <1>(admin) #> fru save
FRU save completed. Configuration File is HP_StorageWorks_MEZnn_FRU.bin
Please use FTP to extract the file out from the System.

Help

Displays a list of the commands and their syntax using the basic help command for iSCSI and
iSCSI/FCoE modules:

MEZ50 <1>#> help

iSCSI/FCoE module CLI command qualifier

iSCSI module CLI command qualifier

CLI command

[ begin | end | start | stop |
cancel ]

admin

[ on | off ]

beacon

date

[ logs | stats ]

clear

exit

[ restore | save ]

fru

help

history

[ cleanup | list | unpack ]
image cleanup

image

220 Command reference