HP EVA P6000 Storage - Manual (Page 263)

VpGroup Information
---------------------
Index 1
VpGroup Name VPGROUP_1
Status Enabled
WWPNs 21:00:00:c0:dd:00:00:75
21:00:00:c0:dd:00:00:76
Index 2
VpGroup Name VPGROUP_2
Status Enabled
WWPNs 21:01:00:c0:dd:00:00:75
21:01:00:c0:dd:00:00:76
Index 3
VpGroup Name VPGROUP_3
Status Enabled
WWPNs 21:02:00:c0:dd:00:00:75
21:02:00:c0:dd:00:00:76
Index 4
VpGroup Name VPGROUP_4
Status Enabled
WWPNs 21:03:00:c0:dd:00:00:75
21:03:00:c0:dd:00:00:76
Example 2: The iSCSI module does not presently support VPgroups.
MEZ50 (admin) #> show vpgroups
Usage: show [ chap | fc |
features | initiators |
initiators_lunmask | iscsi |
isns | logs |
luns | luninfo |
lunmask | memory |
mgmt | ntp |
perf | presented_targets |
properties | snmp |
stats | system |
targets ]
Shutdown
Shuts down the module.
Admin session Authority
shutdown Syntax
Example: This operation disables the iSCSI or iSCSI/FCoE module, a controller power cycle is
required to reactivate the iSCSI or iSCSI/FCoE module.
MEZ75 (admin) #> shutdown
Are you sure you want to shutdown the System (y/n):
Target
Removes an offline target from the module’s database. Typically, you will use this command to
remove targets from the database that are no longer connected to the module or to add a target
that was offline. However, these commands are not needed by the iSCSI and iSCSI/FCoE modules
Commands 263