HP EVA P6000 Storage - Manual (Page 222)

iSCSI/FCoE module CLI command qualifier iSCSI module CLI command qualifier CLI command
traceroute
iSCSI Server Connectivity Command
Set:
========================================
lunmask [ add | rm ]
show [initiators_lunmask | lunmask
]
show initiators_lunmask
show lunmask
History
Displays a numbered list of the previously entered commands.
None Authority
history Syntax
Example: :
MEZ50_02 (admin) #> history
1: save capture
2: admin start
3: admin start
4: save logs
5: save fru
6: fru save
7: save traces
8: save capture
9: image list
10: show system
11: show mgmt
12: history
13: history
MEZ50_02 (admin) #>
Image
Updates the iSCSI or iSCSI/FCoE module's firmware image and cleans up (removes) the image
files in the module’s /var/ftp directory.
Admin session Authority
cleanup
list [file]
unpack [file] image Syntax
Removes all firmware image files in the module’s /var/ftp
directory. These are files transferred by the user when updating the
module’s firmware image. cleanup Keywords
Displays a list of the firmware image files in the module’s /var/
ftp
directory.
list [file]
Unpacks the firmware image file specified in the [file] parameter
and installs the firmware image on the module. Before using this upack [file]
command, you must first transfer the firmware image file to the
module’s /var/ftp directory using FTP. To activate the new
firmware, you must reboot the module.
222 Command reference