HP EVA P6000 Storage - Manual (Page 103)

Installing the MPIO feature for Windows Server 2008
NOTE: Microsoft Windows 2008 includes a separate MPIO feature that requires installation for
use. Microsoft Windows Server 2008 also includes the iSCSI Initiator. Download or installation is
not required.
Installing the MPIO feature for Windows Server 2008:
1.
Check the box for Multipath I/O in the Add Features page ( Figure 37 (page 103) ).
Figure 40 Add Features page
2. Click Next and then click Install.
3. After the server reboots, add support for iSCSI Devices using the MPIO applet (see
Figure 41 (page 103) and Figure 42 (page 104) ).
NOTE: You must present a virtual disk to the initiator to enable the Add support for iSCSI
devices checkbox.
Figure 41 MPIO Properties page before reboot
Set up the iSCSI Initiator 103