Show isns, Show logs, Show isns show logs – HP EVA P6000 Storage User Manual
Page 249

iSCSI Header Digests Disabled
iSCSI Data Digests Disabled
iSCSI Port GE4
Port Status Enabled
Link Status Up
iSCSI Name iqn.2004-09.com.hp:fcgw.mez50.1.3
Firmware Revision 1.0.0.0
Current Port Speed 1Gb/FDX
Programmed Port Speed Auto
MTU Size Normal
Window Size 32768
MAC Address 00-23-7d-f4-15-a8
IPv4 Address 0.0.0.0
IPv4 Subnet Mask 0.0.0.0
IPv4 Gateway Address 0.0.0.0
IPv4 Target TCP Port No. 3260
IPv4 VLAN Disabled
IPv6 Address 1 ::
IPv6 Address 2 ::
IPv6 Link Local fe80::223:7dff:fef4:15a8
IPv6 Default Router ::
IPv6 Target TCP Port No. 3260
IPv6 VLAN Disabled
iSCSI Max First Burst 65536
iSCSI Max Burst 262144
iSCSI Header Digests Disabled
iSCSI Data Digests Disabled
Show iSNS
Displays Internet simple name service (iSNS) configuration information for the specified iSCSI port.
If you do not specify the port, this command displays the iSNS configuration information for all
iSCSI ports.
None
Authority
[port_num]
show
isns
Syntax
The iSCSI port number whose iSNS configuration is to be
displayed.
[port_num]
Keywords
Example:
MEZ75 (admin) #> show isns
iSNS Information
----------------
iSNS Enabled
IP Address 10.3.6.33
TCP Port No. 3205
Show logs
Displays either all or a portion of the module's event log.
None
Authority
[last_x_entries]
show logs
Syntax
Shows only the last x number of module's log entries. For
example, show logs 10 displays the last ten entries in the
[last_x_entries]
Keywords
module event log. The show logs command (not specifying
number of entries) displays the entire module event log.
Commands 249