HP EVA P6000 Storage - Manual (Page 219)

Clears all entries from the module's log file. logs Keywords
Resets the statistic counters. stats
Examples: The following examples show the clear commands:
MEZ50 <1>(admin) #> clear logs
MEZ50 <1>(admin) #> clear stats
Date
Displays or sets the date and time. To set the date and time, you must enter the information in the
format MMDDhhmmCCYY (numeric representation of month-date-hour-minute-century-year). The new
date and time takes effect immediately. Each module has its own independent date set. Properly
setting the date ensures that event log entries are dated correctly. The date must be set prior to
applying any feature keys or licenses.
Admin session required to set the date and time. No authority is required to display the
current date and time. Authority
[MMDDhhmmCCYY] date Syntax
Specifies the date, which requires an Admin session. If you omit
[MMDDhhmmCCYY], the command displays the current date,
which does not require an Admin session. [MMDDhhmmCCYY] Keywords
NOTE: Always set the time using Greenwich Mean Time (GMT) and Universal Transverse Mercator
(UTM). You must disable the network time protocol (NTP) to set the time with the date command.
Examples: The following examples show the setting and then the display of the date:
MEZ50_02 (admin) #> date
Tue May 24 18:33:41 UTC 2011
MEZ50_02 (admin) #> date ?
Please enter time in Universal (UTC) timezone.
Note that Universal (UTC) time may not be the same as your local time.
Usage: date []
MEZ50_02 (admin) #> date 052513272011
Wed May 25 13:27:00 UTC 2011
MEZ50_02 (admin) #>
Exit
Exits the command line interface and returns you to the login prompt (same as the quit command).
None Authority
exit Syntax
Example 1: The exit command logs the session out. The following example shows the exit
command:
MEZ50 #>exit
Connection to host lost.
Commands 219