Set alias – HP EVA P6000 Storage User Manual
Page 232
Assigns alias name to a presented iSCSI target. See
the
“set alias command” (page 232)
alias
Keywords
Sets the CHAP secrets. See the
chap
Sets the FC port parameters.
fc [
Applies license keys to the module. See the
features
Sets the iSCSI port parameters. See the
iscsi [
Sets the Internet simple name service (iSNS) parameters.
See the
isns
Sets the management port parameters. See the
mgmt
Sets the network time protocol (NTP) parameters. See
the
ntp
Configures CLI properties for the module. See the
properties command” (page 237)
properties
Sets the simple network management protocol (SNMP)
parameters. Sets system parameters such as symbolic
snmp [trap_destinations
[
name and log level. See the
Sets system parameters such as symbolic name and log
level. See the
“set system command” (page 239)
system
Sets virtual port groups (VPGs) on the module. See the
“set VPGroups command” (page 239)
vpgroups [vpgroup index]
Set alias
Allows an alias name to be assigned to a presented iSCSI target.
Admin session
Authority
set alias
Syntax
Example:
MEZ50 <2> (admin) #> set alias
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 iqn.1986-03.com.hp:fcgw.MEZ50.0834e00025.b1.01.50001fe150070ce9
1 iqn.1986-03.com.hp:fcgw.MEZ50.0834e00025.b1.02.50001fe150070ce9
2 iqn.1986-03.com.hp:fcgw.MEZ50.0834e00025.b1.03.50001fe150070ce9
3 iqn.1986-03.com.hp:fcgw.MEZ50.0834e00025.b1.04.50001fe150070ce9
4 iqn.1986-03.com.hp:fcgw.MEZ50.0834e00025.b1.01.50001fe150070cec
5 iqn.1986-03.com.hp:fcgw.MEZ50.0834e00025.b1.02.50001fe150070cec
6 iqn.1986-03.com.hp:fcgw.MEZ50.0834e00025.b1.03.50001fe150070cec
7 iqn.1986-03.com.hp:fcgw.MEZ50.0834e00025.b1.04.50001fe150070cec
Please select a iSCSI node from the list above ('q' to quit): 0
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
232 Command reference