HP EVA P6000 Storage - Manual (Page 194)

Table 27 Error Messages (continued)
How to correct Meaning Status code value
Verify/re-establish communication to
the remote site. Attempt to create a data replication group
failed because of a loss of communication
with the remote site. 201
No Path To DR Destination
Report the error to product support. This error is no longer supported. 202
Nonexistent Group
Report the error to product support. This error is no longer supported. 203
Invalid Asynch Log Size
Report the error to product support. Failed to reserve additional space for data
replication log disk capacity. 204
Reserve Asynch Log Capacity
Change data replication group
asynchronous mode and retry
operation. Data replication operation attempted while
in asynchronous mode. 205
Not In Synchronous Mode
Retry request later (after instant restore
has completed). An instant restore operation is in progress
on this virtual disk (or another related virtual
disk). 206
Instant Restore In Progress
No action required. Cannot perform this operation on a mirror
clone device. 207
Mirror Clone
No action required. Cannot perform operation while mirror clone
is resynchronizing. 208
Mirror Clone Synchronizing
No action required. Cannot perform operation because device
or associated device is a mirror clone. 209
Has Mirror Clone
Report the error to product support. This error is no longer supported. 210
Invalid Remote Node
No action required. Cannot perform Instant Restore operation
because device or associated device is a
mirror clone. 211
Incompatible Instant Restore
Node
Suspend data replication group and
retry operation. Cannot perform an Instant Restore operation
because data replication group is NOT
suspended. 212
The DR Group Is Not Suspended
Report the error to product support. Cannot start an Instant Restore operation
because the virtual disks are not in a
Business Copy sharing relationship. 213
Snap Tree Mismatch
Report the error to product support. Cannot start an Instant Restore operation on
the original virtual disk. 214
Original Logical Disk
Retry the request later. The drive is in the process of regenerating ,
reverting, or missing. 215
LDAD Downgraded
Report the error to product support. Not enough quorum disks for redundancy
to do drive code load. 216
Insufficient Quorums
No action required. The requested operation has already been
completed. 217
Already Complete
Take drive out of maintenance mode
and retry command. A drive is in maintenance mode. 218
Maintenance Mode
Retry the request later. A drive or associated drive in the tree which
is a snapshot is being deleted. 219
Deleting Invalid Snapshots
Retry the request later. A data replication device is transitioning
from async/sync or sync/async. 220
Temporary Sync Set
Wait for an Instant Restore to finish
then retry the request. Maximum Instant Restores in progress. Need
to wait for one to finish. 221
Max Instant Restores
194 Error messages