HP EVA P6000 Storage - Manual (Page 126)

2. Click Yes to start the general configuration wizard (see Figure 62 (page 126) ). Use the Wizard
to:
•
Choose iSCSI HBA port to configure the QLogic iSCSI HBA.
•
Configure HBA Port network settings.
•
Configure HBA Port DNS settings (optional).
•
Configure SLP Target Discovery settings (optional).
•
Configure iSNS Target Discovery settings (optional).
Figure 61 Connect to host screen
Figure 62 Start general configuration wizard
Adding targets to QLogic iSCSI Initiator
To add the HBA Port iSCSI targets:
1.
Click the green plus sign (see Figure 63 (page 127) ).
2. Enter the first iSCSI or iSCSI/FCoE module's target port IP address.
126 iSCSI or iSCSI/FCoE configuration rules and guidelines