HP EVA P6000 Storage - Manual (Page 275)

qsrIsInitStatus
Integer:
1 = unknown, Syntax
2 = loggedIn,
3 = loggedOut,
4 = recovery
Read-only Access
Status of the iSCSI initiator, that is, whether or not it is logged in to the module. Description
qsrIsInitOsType
SnmpAdminString Syntax
Read-only Access
The type of the iSCSI initiator's operating system. Description
qsrIsInitChapEnabled
Integer: 0 = enabled; 2 = disabled Syntax
Read-only Access
A value indicating whether CHAP is enabled or not for this iSCSI initiator. Description
LUN table
These tables contain information about the logical unit number (LUN) list.
qsrLunTable
SEQUENCE OF QsrLunEntry Syntax
Not accessible Access
A list of the LUNs on the FC targets discovered by the module. There are as
many entries in this table as there are FC targets on the module. Description
qsrLunEntry
QsrLunEntry Syntax
Not accessible Access
Each entry (row) contains information about a specific LUN. This table extends
scsiDscLunTable
in QLOGIC-SCSI-MIB. The entries in this table show
other attributes of the LUN.
Description
The QsrLunEntry contains of following sequences of objects.
PhysAddress qsrLunWwuln
SnmpAdminString qsrLunVendorId
SnmpAdminString qsrLunProductId
SnmpAdminString qsrLunProdRevLevel
Unsigned32 qsrLunSize
INTEGER qsrLunState
Management Information Base 275