HP EVA P6000 Storage - Manual (Page 182)

Table 27 Error Messages (continued)
How to correct Meaning Status code value
Case 1: Either delete the associated
object or resolve the in progress state. Several states can cause this message:
Case 1: The operation cannot be performed
because an association exists a related
object, or the object is in a progress state. 25
Objects in your system are in use,
and their state prevents the
operation you wish to perform.
Case 2: Report the error to product
support.
Case 2: The supplied virtual disk handle is
already an attribute of another derived unit.
This may indicate a programming error.
Case 3: Unpresent the LUNs before
deleting this virtual disk.
Case 4: Resolve the delay before
performing the operation.
Case 3: One or more LUNs are presented
to EVA hosts that are based on this virtual
disk.
Case 5: Delete any remaining virtual
disks or wait for the used capacity to
Case 4: Virtual disk clear data lost: The
virtual disk is in the non-mirrored delay
window.
reach zero before the disk group can
be deleted. If this is the last remaining
disk group, uninitialize the storage cell
to remove it.
Case 5: LDAD discard: The operation cannot
be performed because one or more virtual
Case 6: Report the error to product
support.
disks still exist, the disk group still may be
recovering its capacity, or this is the last disk
group that exists.
Case 7: The disk must be in a reserved
state before it can be erased.
Case 6: LDAD resolve condition: The disk
group contains a disk volume that is in a
Case 8: Delete the virtual disks or LUN
presentations before uninitializing the
storage cell.
data-lost state. This condition cannot be
resolved.
Case 9: Delete the LUN presentations
before deleting the EVA host.
Case 7: Physical store erase volume: The
disk is a part of a disk group and cannot be
erased.
Case 10: Report the error to product
support.
Case 8: Storage cell discard: The storage
cell contains one or more virtual disks or
LUN presentations.
Case 11: Resolve the situation before
attempting the operation again.
Case 9: Storage cell client discard: = The
EVA host contains one or more LUN
presentations. Case 12: Resolve the situation before
attempting the operation again.
Case 13: Select another disk or
remove the disk from the disk group
Case 10: Virtual disk discard: The virtual
disk is in use and cannot be discarded. This
may indicate a programming error.
before making it a member of a
different disk group.
Case 11: Virtual disk set capacity: The
capacity cannot be modified because the Case 14: Remove the virtual disks from
the group and retry the operation.
virtual disk has a dependency on either a
snapshot or snapclone.
Case 12: Virtual disk set disk cache policy:
The virtual disk cache policy cannot be
modified while the virtual disk is presented
and enabled.
Case 13: VOLUME set requested usage: The
disk volume is already a member of a disk
group or is in the state of being removed
from a disk group.
Case 14: GROUP discard: The Continuous
Access group cannot be discarded as one
or more virtual disk members exist.
Report the error to product support. The operation cannot be performed because
the object does not exist. This can indicate
a user or program error.
VOLUME set requested usage: The disk
volume set requested usage cannot be 26
Parameter Object Does Not Exist
performed because the disk group does not
exist. This can indicate a user or program
error.
182 Error messages