HP Insight Control Software for Linux - Manual (Page 160)

NOTE: Insight Control for Linux does not support monitoring of virtual hosts running VMware
ESXi , and does not support servers or virtual guest s running Microsoft Windows.
20.1.1 Collecting metrics through a management processor
Insight Control for Linux supports management processors using the iLO or IPMI protocols for
gathering sensor and system event log information. To access a system’s management processor,
you must configure the management processor credentials in HP SIM. For more information on
management processor credentials, see
“Management Processor Credentials” (page 198) .
The Environment and System Event Log (SEL) services access the management processor to gather
sensor and SEL information. Insight Control for Linux automatically configures systems to collect
this data.
20.1.2 Collecting metrics through OS agents
Insight Control for Linux installs two small management agents on each managed system to collect
operating system metrics: the Supermon mond daemon and the Nagios Remote Plugin Executor,
nrpe
.
The mond daemon is used for local OS metrics collection. Insight Control for Linux uses the nrpe
plug-in only for control operations (reconfiguration requests), not for periodic data collection.
The Insight Control for Linux agents are built to be generic. These agents can be deployed to any
Linux platform. Insight Control for Linux can monitor any x86-based Linux platform that can run the
agents.
20.1.3 Collecting events with syslog
Insight Control for Linux configures syslog or syslog-ng on each host to forward events to a
global syslog-ng log aggregator running on the CMS. The resulting information is saved on the
CMS or on a
management hub in the /hptc_cluster/adm/logs/consolidated.log file.
This information is periodically scanned by the Nagios Syslog Alert Monitor plug-in and is verified
for known patterns defined in the /opt/hptc/nagios/etc/syslogAlertRules file. This
information is collected without the need for any Insight Control for Linux specific agents on Linux
platforms.
Each managed system runs the syslogd or syslog-ng daemon (RHEL runs syslogd; SLES runs
syslog-ng
) and passes events of priority warning or higher to its corresponding management
hub; management hubs also run the syslogd or syslog-ng daemon and pass their own events
to the master management hub aggregator. Each management hub runs the syslogng_forward
service, and writes the events it receives from its managed systems to the
/hptc_cluster/adm/logs/aggregator_nodename.log
file, where nodename is the node
name of the management hub. If so configured, the management hubs forward their clients' events
to the master management hub. The highest level management hub produces a consolidated log
file, /hptc_cluster/adm/logs/consolidated.log.
20.2 Nagios overview
Insight Control for Linux uses the Nagios open source application to gather and display system
statistics, such as processor load and disk usage. Nagios watches hosts and services and alerts
you when problems occur or are resolved.
The design of the Nagios application incorporates the concept of a plug-in; that is, an independent
file that extends the Nagios application. This design enables the development of service checks,
which are use to examine system and network services.
Nagios, as provided with Insight Control for Linux, is configured with system and network service
checks already in place for your system; these network service checks are automatically configured
for each managed system.
160 Using graphical tools to monitor managed systems