HP Insight Control Software for Linux User Manual
Page 14
Table 1 Insight Control for Linux extensions to the HP Insight Control user interface; (continued)
Documented in
Description
Menu item
used by the Network Configuration Editor tool. The network
definitions are used by the OS installation tools to implement
booting using the virtual media mechanism.
IMPORTANT:
The network definitions must be created before
initiating
discovery through virtual media.
The Network Configuration Editor allows the administrator to apply
predefined network configuration parameters to servers (with
Options
→IC-Linux→Network
Configuration Editor
-based management processors) that are booted using the
mechanism.
This tool allows the administrator to initiate a bare-metal discovery
for servers using their already discovered management processors.
Options
→IC-Linux→Initiate
Bare Metal Discovery
It is a single page that lets you select the boot method of the server
as either PXE or virtual media, then boots the server using the
selected method to initiate a bare-metal discovery.
Removes Insight Control for Linux management agents and
associated files from selected managed systems.
Deploy
→Deploy Drivers,
Firmware and
Agents
→IC-Linux→Uninstall
Agents...
Configures SNMP on LO100 based systems to provide information
so that the systems that HP SIM can properly identify. On iLO-based
Deploy
→Deploy Drivers,
Firmware and
systems, the Insight Control for Linux agents provides this
information.
Agents
→IC-Linux→Configure
SNMP on DL1xx Servers...
Changes the default management processor user name and
password or modifies the management processor user name and
password on selected target managed systems.
Configure
→Management
Processor
→Credentials...
Monitoring
Launches
, a monitoring tool that displays and generates
alerts for all managed systems and services.
Tools
→Integrated
Consoles
→Nagios
Displays graphs about network bandwidth and other system usage.
Tools
→Integrated
Consoles
→Nagios→HP Graph
Displays metric data in one-second intervals for systems monitored
and managed by Insight Control for Linux.
Tools
→Integrated
Consoles
→Performance
Dashboard...
System management
Runs a user-specified Linux command through
on one or more
managed systems.
Tools
→Command Line
Tools
→Run SSH Command...
Runs a Linux script from the Insight Control for Linux
on
one or more managed systems.
Tools
→Command Line
Tools
→Run Script...
Accesses the management processor on the selected target
managed system or systems to power on, power off, or reboot the
managed system or systems.
Tools
→Server Controls→Power
Off Server...
Tools
→Server Controls→Power
On Server...
Tools
→Server
Controls
→Reboot Server...
Repository management
Enables you to register items in the repository and manage the
contents of the repository.
Options
→IC-Linux→Manage
Repository
OS installation
14
Using Insight Control for Linux