HP XP7 Storage - Manual (Page 354)

Message ID Message Text Explanation
Action
Check whether the HDLM driver
has started normally. If it has not
started or contains an error,
contact your HDLM vendor or the
maintenance company, if there is
a maintenance contract for HDLM,
and report the error and detail
code.
KAPL05012-I The device (aa...aa) for Disk
(bb...bb), Partition (cc...cc) is
selected for a mounted drive.
Details
The device object corresponding
to the disk (bb...bb: Disk
sequence number (decimal
(base-10) number)), partition
(cc...cc: Partition sequence
number (decimal (base-10)
number)), and device object
address (aa...aa: Device object
address (hexadecimal number)) is
the first path for the LU (including
the non-HDLM target device).
Action
None.
KAPL05013-I The device (aa...aa) for Disk
(bb...bb), Partition (cc...cc) was
removed from the mounted
drive.
Details
The device object corresponding
to the disk (bb...bb: Disk
sequence number (decimal
(base-10) number)), partition
(cc...cc: Partition sequence
number (decimal (base-10)
number)), and device object
address (aa...aa: Device object
address (hexadecimal number)) is
the second or a subsequent path
for the LU.
Action
This is normal. If the target drive
cannot be referenced, check the
disk configuration.
KAPL05014-I The device object (aa...aa) was
registered as the path (bb...bb).
Details
The path (bb...bb: Core logic path
identifier (hexadecimal number))
of the device object (aa...aa:
Filter driver management table
address (hexadecimal number))
was successfully registered into
the core logic.
Action
None.
8-56
Messages
Hitachi Dynamic Link Manager (for Windows®) User Guide