HP XP7 Storage - Manual (Page 137)

firewall_setup command syntax
If the host OS is Windows, the firewall_setup command is used to register
the ports used by the Hitachi Command Suite Common Agent Component as
firewall exceptions.
The firewall_setup command is stored in the following location, depending
on whether the Device Manager agent is installed.
• Device Manager agent is installed:
program-installation-destination-drive:\Program Files
# \Hitachi
\HDVM\HBaseAgent\bin\firewall_setup.bat
• Device Manager agent is not installed:
program-installation-destination-drive:\Program Files
# \HDVM
\HBaseAgent\bin\firewall_setup.bat
#
For Windows Server 2003 (excluding the x86 edition) , Windows Server
2008 (excluding the x86 edition) , or Windows Server 2012, Program
Files is Program Files (x86).
The following table describes the firewall_setup command syntax.
Table 3-13 firewall_setup command syntax
Item Details
Synopsis firewall_setup {-set|-unset}
Description Registers the following ports used by the Hitachi Command Suite
Common Agent Component in a Windows environment as firewall
exceptions:
•
Port set for the server.agent.port property (default: 24041/
tcp)
• Port set for the server.http.port property (default: 24042/
tcp)
• Port set for the server.http.localPort property (default:
24043/tcp)
This operation requires Administrators group privileges. If the OS is
Windows Server 2008 or Windows Server 2012, the command
must be executed from a command prompt started as an
Administrator.
Options -set
Adds firewall exceptions.
-unset
Removes firewall exceptions.
Note:
Creating an HDLM Environment
3-69
Hitachi Dynamic Link Manager (for Windows®) User Guide