HP XP7 Storage - Manual (Page 201)

For details on how to execute the view operation and display the HBA
port WWN and path name, see Parameters Used When Displaying Path
Information on page 6-43 in Parameters on page 6-35 .
Example
The following shows an example of placing offline the paths for which
the HBA port WWN is 10000000C93213BA, target ID is
0000000000000001, and host LU number is 0000 while confirming
command operation.
PROMPT>dlnkmgr offline -path -hbaportwwn 10000000C93213BA -
tid 1 -hlun 0
KAPL01052-I The currently selected paths will be changed to
the Offline(C) status. Is this OK? [y/n]: y
KAPL01053-I If you are sure that there would be no problem
when the path is placed in the Offline(C) status, enter y.
Otherwise, enter n. [y/n]: y
KAPL01061-I 1 path(s) were successfully placed Offline(C); 0
path(s) were not. Operation name = offline
PROMPT>
-s
Executes the command without displaying the message asking for
confirmation of command execution from the user. Specify this parameter
if you want to skip the response to the confirmation message: for
example, when you want to execute the command in a shell script or
batch file.
Example
The following example shows how to place a path, whose
AutoPATH_ID is 000001, offline without asking for confirmation of
command execution from the user:
PROMPT>dlnkmgr offline -pathid 1 -s
KAPL01061-I 1 path(s) were successfully placed Offline(C); 0
path(s) were not. Operation name = offline
PROMPT>
To Display the Format of the Offline Operation
-help
Displays the format of the offline operation.
Example
The following example shows how to display the format of the
offline operation:
PROMPT>dlnkmgr offline -help
offline:
Format
dlnkmgr offline [-path] -hba HBAPortNumber.BusNumber [-s]
dlnkmgr offline [-path] -cha -pathid AutoPATH_ID [-s]
dlnkmgr offline [-path] -pathid AutoPATH_ID [-s]
dlnkmgr offline [-path] -hbaportwwn HBA_Port_WWN
[-tid Target_ID -hlun Host_LUN] [-s]
Command Reference
6-9
Hitachi Dynamic Link Manager (for Windows®) User Guide